-40%

5 Gallons Solvent Based Gloss Concrete Sealer X-4S for stamped or decorative

$ 160.51

  • Brand: Stone Technologies Corp
  • Country/Region of Manufacture: United States
  • MPN: 5CSX4S
  • Type: Caulks & Sealant
  • UPC: 793936820735
  • gtin13: 793936820735

Description

5 gallon Concrete Sealer X-4S manufactured by Stone Technologies Corp. Concrete Sealer X-4S is a solvent based version of Concrete Sealer X-4. Concrete Sealer X-4S produces a high gloss finish that enhances protects the appearance of all types of decorative, stained stamped concrete pavers, brick, mortar, masonry, concrete structures concrete aggregate driveways. Concrete Sealer X-4S is an acrylic copolymer blend with built in UV inhibitors prevent yellowing which protects the surface of the concrete making it repellent water, freezing temperatures, sun, pollution staining. Concrete Sealer X-4S can be used on all types of concrete make it dustproof. it is particularly effective on exposed aggregate surfaces reduce wear eliminate the problem of loose pebbles. Concrete Sealer X-4S provides a protective coating which enhances the effect of our 20 different easy useInstant Concrete Dyes that stain dry on the concrete in only 5 minutes. Concrete Sealer X-4S meets the following specifications; ASTM C 309, Type 1, Class A & B ASTM C 1315, Type 1, Class A AASHTO Specification M-148, Type 1, Class A & B Federal Spec TTC-800 Type 1 Dried Coating is USDA Accepted Concrete Sealer X-4S is easy apply using a brush, medium nap roller or low pressure sprayer at any temperature between 40-80°F. The surface be treated does not need any special treatment but it must be water, oil dust free allow proper penetration of the sealer. Check the surface of your concrete before applying this sealer make sure it absorbs drops of water within 20-30 seconds, If it beads up then use Eco Concrete Etcher prior applying this sealer. Coverage rate is approximately 200 400 sf/gal/app depending on the concrete porosity two coats are recommended rather than one thick coat. Application time between coats is 4 6 hours allow cure for 24 48 hours without rain. S&H is FREE in USA(48) by FEDEX ground Please contact technical support if you have any questions We offer a 100% guarantee that anything you buy from us will be exactly as described that you will be 100% satisfied or you can send it back for a 100% refund. THANK YOU FOR VISITING OUR AUCTIONS!!!